Skip to content

Insights

Missing molds, disrupted lines: managing tooling and molds with ERP

blog

“The machine is ready, the operators are standing by, and the materials have been issued to the line… but when it’s time for setup, the mold (or die) is nowhere to be found on the storage rack! By the time someone tracks it down somewhere in the factory, it turns out the mold has run past its shot limit and its edges are chipped, so the parts come out covered in flash and blemishes. In the end, the entire lot has to be scrapped!”

If your factory works in plastic injection molding, metal stamping, or rubber molding, you know that molds and specialized tooling are the heart of production. These assets cost anywhere from tens of thousands to millions of baht.

The irony is that many factories manage million-baht molds with a notebook, or simply rely on the chief technician’s memory. Without rigorous usage records, molds become a blind spot that undermines overall equipment effectiveness (OEE) and causes enormous losses.

The “disappearing mold” crisis: hidden costs that eat into profit

Running molds and tooling without a control system leads to structural losses:

  • Excessive setup time: Planners schedule jobs based only on whether the machine is free, without checking whether the mold is ready. When the job comes up, staff scramble to find the mold, and hours of machine time are wasted.
  • Tool wear defects: Every mold has a rated service life, measured in shots or cycles. If no one records how many times it has been used for stamping or injection, the tool wears past its limit, parts come out with dimensional errors, and QC rejects them.
  • Unnecessary capital expenditure: When a mold can’t be found, or is allowed to deteriorate beyond repair, purchasing has to spend hundreds of thousands of baht to have a replacement made, when with proper maintenance the old mold might have had plenty of service life left.

Controlling your shop-floor assets with tooling management in ERP

Factories moving toward becoming smart factories don’t accept production stoppages because equipment can’t be found. An ERP (Enterprise Resource Planning) system with tooling and mold management links tooling data to the production line through three smart mechanisms:

1. Linking molds to the BOM and routing

Forget the old way of scheduling! The ERP requires you to define in the system that product A must run on Machine No. 1 with Mold No. 005, and nothing else. When a planner schedules a job, the system instantly checks that mold’s status: available, in use, or out for repair. If the mold isn’t ready, the system will not release the work order to the shop floor.

2. Automated shot and cycle tracking

This is the feature that saves the factory money! Every time the machine runs, the ERP captures the data and counts the production shots or cycles, automatically deducting them from that mold’s total service life. Management can see in real time which molds are nearing the end of their life and which are still in full working condition.

3. Locking molds for maintenance to prevent defects (mold maintenance alerts)

When the ERP detects that a mold has reached 100,000 shots (its specified limit), it raises an alert and locks the mold so it can no longer be issued for use. At the same time, it creates a maintenance order instructing the tooling team to polish, clean, or recoat the mold. This ensures that every mold sent to a machine is always in perfect working condition.

Summary: precise tooling control for seamless production

“A good mold is where a quality product begins.” Managing specialized tooling is not just a concern for the warehouse or maintenance team; it directly affects production costs and customer satisfaction. Investing in an ERP system for tooling management removes these constraints, cuts wasted time at the machine, and extends the service life of your expensive assets so that every investment pays off.

Just think… how many minutes do your staff spend today hunting for molds at every production changeover? Plug the leaks on your shop floor and manage mold life professionally. Talk to our manufacturing ERP experts today!

References

  • Kalpakjian, S., & Schmid, S. R. (2014). Manufacturing Engineering and Technology. Pearson. (Cited for manufacturing process theory, tool and die wear, and its effect on product defects.)
  • Groover, M. P. (2015). Automation, Production Systems, and Computer-Integrated Manufacturing. Pearson. (Cited for integrated management of production resources, production scheduling that accounts for tooling availability, and preventive maintenance.)

Back to all articles